Adjusting The Projector's Elevation - Eiki LC-WIP3000 Owner's Manual

Setting Up

Adjusting The Projector's Elevation

Use the adjustable foot at the front of the projector to set the image height.
1 Holding the projector, push the foot adjust
buttons to loosen the front adjustable foot.
Position the front side of the projector to the
1 2
desired height.
3
Release the foot adjust buttons in order to
lock the front adjustable feet.
1 4
Please make sure that the front adjustable
feet are locked.
Please rotate the adjustable feet when fine
1 5
adjustment of tilt is needed.
CAUTION
* The adjustment range of front adjustable
foot is 0 to 7 degrees.
* When the feet are adjusted, it may cause
the shape of the projected image to become
distorted. Use the keystone correction
function to correct this distortion.
16