Control - Eiki LC-WIP3000 Owner's Manual

Network Control Software Application-Browser Control

Control:

Select projector's detailed setting from this page.
ITEM SETTING DESCRIPTION
Basic
Projector Name Show projector name on the current projector.
System Status how if projector is Power On or Inactive .
Power Switch Power On or Power Off the projector via network.
Input Source Select input source.
Date Setting Update date setting on the projector. Click "Submit" button to update the settings.
Time Setting Update time setting on the projector. Click "Submit" button to update the settings.
Picture
Brightness Adjust the image brightness level.
Contrast Adjust the image contrast level.
Sharpness Adjust the image sharpness.
Color Adjust the strength of whole color.
This function can only be used under Video signal, S-Video signal, or component
video signal input.
Tint Adjust the image tint.
This function can be used under Video signal, S-Video signal, or component video
signal.
Display Mode Adjust Natural/Cinema/Daylight/Green Board/White Board/Black/User Mode.
Audio
Volume Adjust the volume.
Mute Mute the volume OFF / ON.
Setting
V Keystone Manually correct vertical keystone distortion in image.
Auto Sync Set all of the above setting automatically. (This function can only be used under PC
mode)
Auto Search Search signal source manually or automatically.
Advanced
Freeze Freeze the current image on the screen.
Resize 4:3,16:9, 1:1, 16:10
Reset Reset all menu function to their factory default values.
Presentation
Projection Select Front/Ceiling/Rear/Celing and Rear
Lamp Mode Switch lamp mode between normal or ECO mode.
43