Table of Contents
Advertisement
Network Control Software Application
Network Control Software Application
Register the projector(s) which needs to be controlled.
" Auto search " can help you to seek the projector(s) source easily.
After registering in the work group, you can start to control the projector.
G roup the projector(s) into different sections.
You can monitor the status easily by GROUP NAME function in the network.
M onitor the status for each projector.
a.You can manage and change the monitoring content by System Parameter Setting.
b. T he Lamp timer, filter working time or system warning feedback etc. can be
obtained by checking the status of projector(s).
C ontrol the booked projector(s).
The status can be refreshed and acquired by MONITOR functions; you can also
operate the function easily by Network Control.
NOTE
To monitor and control the projector(including stand-by mode), the following
conditions are needed to be ready:
(1) Projector is powered on.
(2) Projector is connected to network.
(3) LED light of the projector network port shows normal. (Green light on, Orange
twinkling)
* Stand-by mode indictor: Green LED (Power) on the projector's control panel flashes.
34
LAN
Advertisement
Table of Contents
