Preparation; General Notes On Connections; Digital Connections; Analog Connections - Yamaha DV-SL100 Owner's Manual

Preparation
General Notes on connections
Never" make or change connections with the power"
switched on.
• Depending on the equipment you wish to connect, there
are various ways you couWdconnect this unit. Possible
connections are shown in the following drawings.
• PWease refer to the manuals of other equipment as
necessar 7 to make the best connections.
• Do not connect this unit via your VCR. The video quality
could be distorted by the copy protection system.
• Do not connect this unit's audio out jack to the phono Jn
jack of your" audio system.
Digital Connections
This unit has COAXIAL and OPTICAL digital out jacks.
Connect one or both of them to your AV receiver
equipped with Dolby digffal, DTS, or HPEG decoder
using each specific cable (separate purchase),
i!
_ote; !
- If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will produce a
strong, distorted sound or no sound at all,/Vlake sure to
select the appropriate audio format at menu screen
included on the disc
Pressing AUDIO once or more may change not only audio
languages but also audio formats, and the selected format
appears for several seconds on the status window.
Analog Connections
Use audio/video cable supplied with this unit to connect
AUDIO OUT L (left) and R (right) jacks of this unit to
corresponding input jacks of your audio equipment such
as Stereo amplifier,
[
_suppllea)
arnDlifie
You will need to set this unit's digital output to
All (see 'DIGITAL OUTPUT').