Preparation; General Notes On Connections; Digital Connections; Analog Connections - Yamaha DVD-S550 Owner's Manual

Never make or change connections with
the power switched on.
• Depending on the equipment you wish
to connect, there are various ways you
could connect this unit. Possible
connections are shown in the following
drawings.
• Please refer to the manuals of other
equipment as necessary to make the
best connections.
• Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
• Do not connect this unit's audio out
jack to the phono in jack of your audio
system.
This unit has COAXIAL and OPTICAL
digital out jacks. Connect one or both of
them to your AV receiver equipped with
Dolby digital, DTS, or MPEG decoder
using each specific cable (separate
purchase).
You will need to set this unit's digital
output to ALL (see page 20
"DIGITAL OUTPUT").
Preparation
Note:
- If the audio format
of
the digital output
does not match the capabilities
of
your
receiver, the receiver will produce a strong,
distorted sound or no sound at all. Make
sure
to
select the appropriate audio format
at menu screen included on the disc.
Pressing AUDIO once or more may change
not only audio languages but also audio
formats, and the selected format appears
for several seconds on the status window.
Use audio/video cable supplied with this
unit to connect AUDIO OUT L (left) and
R (right) jacks of this unit to corresponding
input jacks of your audio equipment such
as Stereo amplifier.
5
Never make or change connections with
the power switched on.
• Depending on the equipment you wish
to connect, there are various ways you
could connect this unit. Possible
connections are shown in the following
drawings.
• Please refer to the manuals of other
equipment as necessary to make the
best connections.
• Do not connect this unit via your VCR.
The video quality could be distorted by
the copy protection system.
• Do not connect this unit's audio out
jack to the phono in jack of your audio
system.
This unit has COAXIAL and OPTICAL
digital out jacks. Connect one or both of
them to your AV receiver equipped with
Dolby digital, DTS, or MPEG decoder
using each specific cable (separate
purchase).
You will need to set this unit's digital
output to ALL (see page 20
"DIGITAL OUTPUT").
Preparation
Note:
- If the audio format
of
the digital output
does not match the capabilities
of
your
receiver, the receiver will produce a strong,
distorted sound or no sound at all. Make
sure
to
select the appropriate audio format
at menu screen included on the disc.
Pressing AUDIO once or more may change
not only audio languages but also audio
formats, and the selected format appears
for several seconds on the status window.
Use audio/video cable supplied with this
unit to connect AUDIO OUT L (left) and
R (right) jacks of this unit to corresponding
input jacks of your audio equipment such
as Stereo amplifier.
5