Front Panel Facilities - Pioneer CT-WM62R Operating Instructions Manual

FRONT PANEL FACILITIES
COPY MODE I <_ II buttons
NORMAL: Press this button to copy a tape from DECK II to
DECK I. (See page 21.)
HI SPEED: Press this button to copy a tape from DECK II to
DECK I at twice the normal speed. (See page 21.)
REVERSE MODE button
Use this button to choose the tape transport mode.
z: One way mode. Tape transport stops after one side of a
tape is played or recorded.
When relay mode is selected, after one cassette ends,
playback or recording (of one side only) continues on
the cassette in the next tape slot, and so on until the
cassette in the highest numbered tape slot is reached.
c._: Reverse mode. During playback, both sides of the tape
are played back continuously until the tape has been
played back 8 times (16 sides). During recording, both
sides of the tape are recorded, and then tape transport
stops.
When relay mode is selected, after both sides of one
cassette have been recorded or played back once,
playback or recording continues on the cassette in the
next tape slot, and so on until the cassette in the high-
est numbered tape slot is reached.
NOTE:
During recording, relay playback and random playback, the
auto reverse function will only operate when the tape is
moving from the end of side A to the beginning of side B.
The tape cannot move automatically from the end of side B
to the beginning of side A during these modes (Le., the tape
will stop at the end of side B even when reverse mode Is
selected).
This indicates that the cassette deck will switch auto-
matically from side A to side B, but will not switch auto-
matically from side B to side A. If, for example, recording is
started from the beginning of side B, the tape will stop after
only one side is recorded, even though reverse mode is
selected.
COUNTER buttons
MODE: Each time this button is pressed, the multifunction
display switches between tape counter display
mode and time counter display mode.
RESET: When this button is pressed, the tape counter is
reset to 0000 and the time counter is reset to 00:
00.
DECK I operation buttons
These buttons operate in the same way as the operation
buttons of DECK II, with the following exceptions:
Forward play (1_): If the tray is open when this button is
pressed, it will close automatically, the
cassette in the lowest numbered slot
will be loaded, and side A will be
played back.
Reverse play (41): If the tray is open when this button is
pressed, it will close automatically, the
cassette in the lowest numbered slot
will be loaded, and side B will be
played back.
Fast reverse
(MS <1<):
10
<RRB1134>
En
Load a cassette tape in the tape
transport mechanism, then press this
button twice to select the ALL REWIND
mode. The ALL REWIND mode begins
from the currently playing tape. Press
the button once more to return to
nomal REWIND mode.
@
@
@
@
@
Recording (o): When this button is pressed, the cas-
sette deck enters recording standby
mode. Recording begins when the
play (1_ or <) button or pause (11)
button is pressed.
Pause (11}: Press this button to temporarily pause
recording or playback. Press the
button again to resume recording or
playback. The pause button cannot be
used during fast-forward or fast-re-
verse. If this button is pressed after the
recording (e) button is pressed, rec-
ording will begin.
Recording mute (O): When this button is pressed during
recording, the cassette deck creates a
4-second blank space on the tape and
then enters recording standby mode. If
the button is pressed and held, the
deck continues to create a blank space
until the button is released (see page
17).
CD-DECK SYNCHRO recording button
(CD SYNCHRO)
See page 22.
DOLBY* NR buttons
DOLBY NR MEMORY button:
Press this button to begin setting the DOLBY NR system, or
to check the current DOLBY NR settings (see page 16).
DOLBY NR OFF/B/C button:
Press this button repeatedly to select the desired type of
DOLBY NR. The selected type of DOLBY NR (B or C) is dis-
played.
If no display appears, DOLBY NR OFF is selected.
When playing back Dolby NR-encoded tapes, always select
the same position (OFF, B or C) used for recording.
Dolby noise reduction and HX Pro headroom extension
manufactured under license from Dolby Laboratories Licensing
Corporation. HX Pro originated by Bang & Olufsen.
"DOLBY" the double-D symbol El3 and "HX PRO" are trade-
marks of Dolby Laboratories Licensing Corporation.
CASSETTE NUMBER buttons (1~6)
Press one of these buttons to select the cassette which will
be loaded from the tray into the tape transport mechanism
of DECK I.
Remote control sensor window
(U,S and Canadian models only)
DECK I OPEN/CLOSE button (A)
Press this button to open the cassette door. When the door
is open, cassette tapes can be placed onto or removed from
the tray. If a cassette is loaded in the tape transport mecha-
nism (see page 5), the door can still be opened and tapes
can be added or removed. However, DO NOT place a
cassette in the tray slot previously occupied by the loaded
cassette.
NOTE:
The cassette tray cannot be opened unless the POWER
switch is turned OFF.