Pioneer CT-WM62R Operating Instructions Manual page 19

PLAYBACK ( DECKI)
Reverse mode playback (CJ)
Press the forward play (1_) button to begin playback from side
A, or press the reverse play (',I) button to begin playback from
side B. Playback of both sides will continue until the tape has
been played back 8 times (16 sides).
To stop playback:
Press the stop (11)button.
To temporarily pause playback:
Press the pause (11) button. To resume playback, press the
pause button again, or press the appropriate play (.q or I_)
button.
To fast-forward or fast-reverse the tape:
The fast-forward or fast-reverse (<1< or IH_) buttons operate
only when the cassette deck is in stop mode. If the tape is
running, press the stop (11)button to stop the tape.
• If the forward tape transport indicator (D) is lit (Side A is
playing), press the fast-forward (IH_) button to fast-forward
the tape, or the fast-reverse (,4.4) button to fast-reverse the
tape.
• If the reverse tape transport indicator (4) is lit (Side B is
playing), press the fast-reverse (,<.4) button to fast-forward
the tape, or the fast-forward (IH_) button to fast-reverse the
tape.
BLANK SKIP FUNCTION (RELAY MODE ONLY)
If a blank section of tape is played back for more than 15
seconds, the cassette deck will automatically forward the tape
to the beginning of the next track, or to the end of the tape.
RELAY PLAYBACK (DECK I only)
RANDOM PLAYBACK (DECK I only)
__ RANDOM U.S. and
Canadian
,_ //9 models
only
If the RANDOM button is pressed during stop mode or play-
back mode, "R,, d," will appear on the multifunction display,
and all cassettes on the tray will be played back in a random
order (Playback always begins from side A).
When one way mode (__) is selected:
The cassette deck will stop after one side of each tape has
been played back.
When reverse mode (c._) is selected:
The cassette deck will stop after both sides of each tape have
been played back. If a tape is rewound to the beginning of side
B, playback of that tape will end after only one side (side B)
has been played back, and the next tape will be selected.
NOTE:
The blank skip function operates during random playback (see
page 19).
SCAN PLAYBACK (DECK I only)
RELAY
U.S. and
Canadian
//z_ /_ models
only
SCAN
_ U.S. and
Canadian
L____I
models
/_) only
When relay playback is selected, the tapes will be played back
in order, from the tape in the lowest numbered cassette slot to
the tape in the highest numbered slot. Press the RELAY button
during playback, or press the RELAY button during stop mode
and then press the play (1_ or ,4) button. If the reverse play (..I)
button is pressed, the first tape will begin playback from side B.
However, the rest of the tapes will automatically begin playback
from side A.
When one way mode (7) is selected:
One side of each tape is played back, then the next tape is
loaded.
When reverse mode (¢-_)is selected:
Both sides of each tape are played back, then the next tape is
loaded. In order for both sides to be played back, all tapes must
be rewound to the beginning of side A. If a tape is rewound to
the beginning of side B, playback of that tape will end after one
side (side B) has been played back, and the next tape will be
loaded,
NOTE:
The blank skip function operates during relay playback.
If the SCAN button is pressed during stop mode or playback
mode, "SERR" will appear on the multifunction display, and
the first 10 seconds of all cassettes on the tray will be played
back, beginning with the cassette in the lowest numbered slot
(Playback always begins from side A).
NOTE:
The blank skip function operates during scan playback (see
page 19).
19
<RRB1134>
En