Table of Contents
Advertisement
I CONNECTIONS
Recordin
connection
cord
TAPE REC/PLAY jacks
When performing
unattended
recording
or wake-up
playback.
I
I
I
Household
AC outlet
•
Read through
the operating
instructions
of the stereo com-
ponents which you intend to connect to this cassette deck.
•
Turn the power on only after making
all the connections.
•
Make sure that the plugs are inserted
securely.
Improper
connections
may generate
noise.
Connecting
the
input/output
cords
Connect the plugs properly.
Left channel
Left channel:
White plug
/
Right channel__
Right channel:
Red plug
CD-DECK SYNCHRO jack
If this cassette deck is used together with a PIONEER CD player
equipped
with
the synchro
recording
function,
synchro
recording from the CD player can be carried out at the touch of
a button (see page 22).
Use the enclosed CD-DECK SYNCHRO control cord to connect
the CD-DECK SYNCHRO jack on this cassette deck to the CD-
DECK SYNCHRO jack on the CO player.
CT-WM62R
rear panel
CD player rear panel
O0-OJCKSYNC!RO
J
Connection
Connect the CD-DECK SYNCHRO jack of this cassette deck to
the CD-DECK
SYNCHRO
jack
of the CD player
using
the
enclosed CD-DECK SYNCHRO control cord.
NOTES:
•
Keep the input
and output
jacks connected
between
the
amplifier
and this cassette
deck.
Otherwise,
CD-DECK
SYNCHRO recording
cannot be carried out
•
Even when the CD player is connected
to the amplifier
with
an optical
fiber cable, connect
the CD player to the amplifier
or to this cassette deck with pin plug connection
cords.
PIONEER System remote control
If this cassette
deck is connected
to other
PIONEER
com-
ponents
bearing
the []
mark, you will be able to operate all of
the connected
components
with one remote control
unit.
CONTROL IN jack
Use the enclosed
mini-plug
cord
to connect
this jack to the
CONTROL
OUT jack of another
component
equipped
with
PIONEER System remote control (bearing the [] mark).
CONTROL OUT jack
Intermediary
jack which outputs signals from the CONTROL IN
jack of this cassette deck to the input jack of another com-
ponent.
Connect
this jack to the CONTROL
IN jack of another com-
ponent compatible with PIONEER System remote control.
NOTE:
When
the system
remote
control
cord
is connected
to the
CONTROL
IN jack, the remote
control
sensor
window
will not
operate (U.S. and Canadian models
only).
8
<RRB1134>
En
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
