Table of Contents
Advertisement
FRONT PANEL FACILITIES
@ FRONT PANEL CONTROLS
creect
me
cee
Goes 6
CH
DECK:
DOLBY
HX PRO
CASSETTE STABILIZER
DECK ts
DOLBY HX PRO
AUTO TAPE BELECTOR
@ POWER switch (POWER)
@ TIMER switch (TIMER MODE)
OFF:
Set to this position when the timer is not in use.
REC:
Set to this position for timer recording (see page 17).
PLAY: Set to this position for timer playback (see page 17).
NOTE:
If you set this switch either to REC or PLAY, the deck will
automatically start to record or playback.
@
REVERSE MODE switch (REVERSE MODE)
(see page 11)
@
DECK I EJECT button ( 4 )
Press to open the cassette door of DECK |. Press the stop button
(1) first to stop a tape running before opening the door.
NOTE:
If you turn off the deck while the tape is running, the cassette
door may not open. In this case, turn on the deck to open the
door.
@ DECK | COUNTER
RESET button (RESET)
Press to return the counter of DECK Ito 2c.
@
DECK | COUNTER
MODE switch (TIME/COUNT)
This button switches the counter of DECK | between the tape
counter and time counter (see page 11).
@
DECK
If COUNTER
RESET button (RESET)
Press to return the counter of DECK Ilto Goon.
@) DECK II COUNTER
MODE switch (TIME/COUNT)
Press to switch the counter of DECK Il between tape counter
andtime counter (see page 11).
6
<RRB1064>
@ DECK II EJECT button ( 4 )
Press to open the cassette door of DECK
Il. Press the stop
button (@) first to stop a tape running before opening the door.
NOTE:
If you turn off the deck while the tape is running, the cassette
door may not open. In this case, turn on the deck to open the
door.
DECK Hl operation buttons
<<:
Press to rewind a tape. If you press during playback, you
can operate skip search, in which the number
of the
skipped tracks corresponds to the number of times you
press the button (see page 13).
<_:
Press to play the back side of a cassette tape (opposite to
the labeled side), which is called reverse playback.
@
=: Press
to stop any
operation,
including
simutaneous
recording or copying.
>
=: Press to play the front side of a cassette tape (labeled
side), which is called forward playback.
bP - Press to fast forward a tape. Press to operate skip search
during playback
in which
the number
of the skipped
tracks correspond to the number of times you press the
button (see page 13).
@ =. Press to recording standby. Press the Pause (Il) or Play
(>, <4) to resume
recording. You cannot
record
if the
erasure prevention tabs are broken.
ll:
Press to stop a tape temporarily
during
reco-ding or
playback. Press it again to resume the operation( you can
also start the operation by pressing ® or <4). Yos cannot
use this button during fast forward or rewinding
O_:
Press during recording, and the recording signas will be
erased
for about 4 sec. Then,
recording
standby (see
page 14).
Advertisement
Table of Contents
