Safety Instructions - Pioneer CT-WM62R Operating Instructions Manual

IMPORTANT
The hghmmg flash with arrowhead, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the p_oduct's
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
CAUTION
CAUTION:
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK), NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The ex_:lamatloll poil_t within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
SAFETY INSTRUCTIONS
READ INSTRUCTIONS All the safety and operating
instructions should be read before the appliance is
operated.
RETAIN INSTRUCTIONS - The safety and operating
instructions should be retained for future
reference.
HEEDWARNING - AItwarnings on the appliance and in
the operating instructions should be adhered to.
FOLLOW INSTRUCTIONS - All operating and use
instructions should be followed.
WATER AND MOISTURE The appliance should not
be used near water for example, near s bathtub,
washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
LOCATION - The appliance shou(d ba installed in a
stable location,
WALL OR CEILING MOUNTING - The appliance
should not be mounted to a wall or ceiling,
VENTILATION - The appli_nce'should be situated so
that its location or position does not interfere with
its proper ventilation. For example, the appliance
should not be situated on a bed, sofa, rug, or similar
surface that may block the ventilation openings; or.
placed in s built-in installation, such as a bookcase
or cabinet that may impede the flow of air through
the ventilation openings.
HEAT - The appliance should be situated away from
heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat,
POWER SOURCES The appliance should be
connected to s power supply only of the type
described in the operating instructions or as
marked on the appliance.
POWER-CORD PROTECTION - Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them. Pay particular attention to cords at
plugs, convenience receptacles, and the point
where they exit from the appliance.
POLARIZATION - If your purchased product is
provided with a polarized power plug, please read
the following instructions, This product is equipped
with a polarized alternating current line plug (a plug
having one blade wider than the other). This plug
will fit into the power outlet only one way, This is s
safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
CLEANING - The appliance should be cleaned only
with a polishing cloth or a soft dry cloth, Never
clean with furniture wax, benzine, insecticides or
other volatile liquids since they may corrode the
cabinet.
POWER LINES An outdoor antenna should be located
away from power lines.
NONUSE PERIODS The power cord of the appliance
should be unplugged from the outlet when left
unused for a long period of time.
OBJECT AND LIQUID ENTRY - Care should be taken
so that objects do not fa_l and liquids are not spilled
into the enclosure through openings,
DAMAGE REQUIRING SERVICE - The appliance
should be serviced by a Pioneer authorized service
center or qualified service personnel when:
• The power-supply cord or the plug has been
damaged,
• Objects have fallen, or liquid has been spilled into
the appliance.
• The appliance has been exposed to rain.
• The appliance does not appear to operate normally
or exhibits a marked change in performance,
• The appliance has been dropped or the enclosure
damaged.
SERVICING The user should not attempt to service
the appliance beyond that described in the
operating instructions. All other servicing should
be referred to quelified service personnel
OUTDOOR ANTENNA GROUNDING If an outside
antenna is connected to the antenna terminal, be
sure the antenna system is grounded so as to
provide some protection against voltage surges
and built-up static charges.
In the U.S.A, section 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with
respect to proper grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode, See Fig.
A.
CART - An appliance and cart combination should be
moved with care, Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart
combination to overturn.
NEC -- NATIONAL ELECTRIC CODE
ANTENNA
LEAD IN
WIRE
GROUND
P ANTENNA
DISCHARGE UNiT
(NEC SECTION 810 -- 20)
GROUNDING CONDUCTORS
(NEC SECTION 810 -- 21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
FIG, A (NEC ART 250, PART H)
2
<RRB1134>
En