Front Panel Facilities - Pioneer CT-W600R Operating Instructions Manual

FRONT PANEL FACILITIES
PIONEER EIA EE CT-WeoOR
@C)
@ POWER switch
@ PHONES jack
© REC LEVEL control
(4) EJECT button
Press to open the cassette door after you have pressed the
stop ( Hi) button and the tape has stopped.
NOTE:
if the power is turned off while the tape is moving, the cassette
door may remain locked. In this case, turn the power on before
pressing the EJECT button.
@ REC BALANCE control
Only deck Il is equipped with a recording function.
Normally leave the REC BALANCE control in the center click
position. Adjust it if you want to change the relative
recording levels of the right and left channels.
6
<RRB1031 >
9 Recording mute (MUTE) button { O )
Press this button during recording to create a blank portion
of approx. 4 seconds on the tape. The unit will then enter
the recording pause mode.
@ PAUSE button ( a )
To stop tape transport momentarily during recordin
playback. Press it again to resume operation (this can
be done by pressing the <@ or B® button}.
This button does not work during fast-forward and rewind.
@ Recording (REC) button ( @ )
To start recording. The unit will not enter the recording mode
if a cassette with the erasure prevention tabs removed is
joaded.