Mitsubishi HS-U780 Owner's Manual page 57

_Important:
Recap Screen
_Prosram %o record
CH DAY ON OFF
2 MOlT ll:30a I:30pSP
i0 TH20 9:00pIO:OOpEP
...... : : SP
--: .... :-- SP
Use ADJUST %0 selec%.
and ENTER. ! : '
Press MENU for Main Menu
_Prosram %0 record
0 Channel 2
Day Monday 17
OS%ar% 1:ime ii :30am
S't;op %ime 1 : 3,0pm
Use AD3UST %0 selec%,
and ENTER.
Press MENU £or Main Menu
Make sure that the "Tape" video function ma:tches the kind of
tape you are using. (See "Selecting and adjusting the audio and
video functions" on page 45.)
Set the time for recording to end a minute or two beyond the
program's scheduled broadcast time to avoid discrepancie:;
between the VCR's clock and tlhe broadcast station's clock,_.
programmingTV programsthatendon thedayafter
If you want to start the recording at 11:00 PM and end it at 2:00
AM the next day, simply set the start time to 11:00 PM on the
recording start day and the end time to 2:00 AM. There is no need
to change the day of the week.
skipping programs
If you have already entered a program into your VCR's memory,
you can skip the program without going into the VCR's menus.
Simply press the POWER button on the front panel once. The
programmed recording light will turn off, and the program will be
skipped. If you decide not to skip the program, press the I?O_rER
button on the front panel twice; the programmed recording light
will light up again.
changing programmedrecording settings
If you want to change the programmed recording settings::
O Press the MENU button on the remote control. Your VCR will
turn on and the "VCR Main Menu" will[ appear on your
screen. Turn the ADJUST dial to selecl: "Program to record."
Turn the shuttle ring to the right. You'll see the "reca]?"
screen.
Turn the ADJUST dial to place the cursor next to the pro.-
gram you wish to change 'Turn the shuttle ring to the rig:ht.
You will see the _Program to record" me,re.
Repeatedly turn the shuttle ring to the right to select the item
you wish to change. Use the ADJUST dial to change i1:.
Use the MENU button to turn off the rnenus. Then, u,;e the
POWER button to turn off the VCR. Mal_:e sure the pro-
grammed recording light is on.
canceling a programmed r ecording beforethe recording starts
0
Press the MENU button on the remote control. Your VCR will
turn on and the "VCR Main Menu" appears on your screen.
Use the ADJUST dial on the remote control to select "Pro-
gram to record." Turn the shuttle ring to the right.
57