Zero Stop; Using Counter Zero Stop; Index Search Technique - Mitsubishi HS-U780 Owner's Manual

Chapter4: UsingtheAdvanced Features Searching Techniques (cont.)
VCR
Coun.Zer
zero stop
Use ENTER to start
>Important:
_Important:
_CR Lookins
for index+ 1
SK r IE
REM 1 : 40
Oh2OmOSs
Using counter zerostop
Counter zero stop is useful to quickly access to the beginning of a
recorded or playback section of a tape. The VCR will automati-
cally fast forward or rewind to "0_00M00S" and stop the tape.
O Press the CA!XICEL button on the remote control at the point
you wish to locate later. The counter will reset to "0H00M00S".
O
When you wish to return to the point specified in step O,
press the VIDEO button on the remote control. The video
function menu appears on your screen. Press the VIDEO
button until the counter zero stop functio:a appears.
O Turn the shuttle :ring right; to start the counter zero stop. 'The
VCR will automatically search to the counter "OHOOMOOs" and
then stop.
Indexsearchtechniques
Index search is a way to find specific points on a tape. Before
using index search, index marks are placed at important places
on a tape. Then, index search iis used to find these marks. Index
marks are added automatically whenever your VCR starts a new
recording; you can also add index marks manually at any point
during recording.
automatic indexmarks
Whenever recording i.s b egun from the STOP mode, an index
mark is automatically added to the tape. The on-screen message
will indicate that the mark is being recorded.
Index marks are not added when you press PAUSE to begin
recording from the record-pause mode.
manual index marks
To add an index mark yourself, press the RE C button on the
remote control while a tape is recording.
Index marks must be added at least one minute apart.
To
O
search for an index mark:
Press the INDEX SEARCH "+" button o_ the remote control
to begin a forward search; press INDEX SEA!_CH "-" to
search in the reverse direc.tion. The VCR will fast forward or
rewind and index search display appears on the TV.
Once the VCR finds an index mark, it will begin playing
back
the tape from that point.
O
You can press the plus (+) or minus (-) buttons up to 19 times
to search for that many index marks. For example, to find the
third index mark ahead, press the plus; (+) button three times.
The on-screen di,_play will count down the number of marks
to be passed before playback begins.
66