Mitsubishi HS-U780 Owner's Manual page 39

ODaylisht savinss (OFF)
O Month March
0 Year 19971
-16 Sunday-
OTime I l_:OOpm
use i AD3"UST lec_ _"
and ENTER::%>Press ,. _-_
MENU for Set-Up Menu
0
Turn the ADJUST dial to set the date. l)urn the shuttle ring
to the right.
ODaylisht savinss (OFF)
0 Month March
0 Year 1997
ODate 16 S_nday_
MENU for Se_-Up Menu
O Se_i!_%heolock
Daylish% savinss (OFF)
0 Month March
0 Year 1997
ODate 16 Sunday
Use ADJUST to select.
and ENTER. Press
MENU for Set-Up MenU!
0
The hour numbers and the am/pm indicator will be blin_dng.
Turn the ADJUST dial to set the hour and am/pm at the same
time. Turning the dial right moves the dock forward; turning
the dial left moves the clock backwards. Turn the shuttle ring
to the right.
O
Turn the ADJUST dial to set the minutes. When you have set
the correct time. turn the shuttle ring to the right. The
display will return to the "First Time S_,.t-Up" menu and the
clock will start running.
O Press the MENU button once to return _o the '_V'CR Main
Menu"; press the MENU button again to turn off the menus.
You can adjust the daylight saving time manually. Make: sure the
words "Daylight savings" is highlighted, and turn the ADJUST
dial to select ON or ,OFF. If you select ON, the VCR will set the
clock forward one hour. If you select OFF, the VCR will s:et the
clock back one hour.
_Important: Any time you adjust this setting, check your programmed record-
ings to be sure they are set to the correct tiraes.
If you have a Mitsubishi TV with StarSight _ feature, the TV can
set the time on your VCR. (See your TV Owner's Guide for de-
tails.) To allow StarSight ®to do this, you must set "Clock: set"
setting of the VCR's "Set the Clock" menu to MANUAL, and the
VCR's "A/V Network" setting to ACTIVE.
StarSight ®is a registered trademark of StarSight Telecast, Inc.
Settingthe VCR Plus+ ®GuideChannelNumbers
(You can skip this section if your VCR has set the guide channels using the ,_AlSet feature. This
setting is necessary if your VCR cannot set the guide channels automatically or you use the
satellite receiver.)
The VCR Plus+ system allows you to program your VCR to record
television shows by simply entering a PlusCode programming
number found after each program in your TV listings.
The VCR Plus+ system assigns a unique nu:mber to each station
in your area. You must do a one-time set-up of your VCR using
these assigned guide channel numbers in order to record correctly
when using the PlusCode numbers. This set-up is required
39