Mitsubishi HS-U780 Owner's Manual page 31

_Important:
_AIISe_ ; ......
Now memorizins all the
s_ations you can receive
Channel 3
S_and by zhis may take
aofew minutes
To:cancel memorization,
_AllSet
Use number keys to enter
ZieCode
30071
P_ess ENTER _hen;dOne.
Press CANCEL _o erase
the
ZipCode : Press ::
MENU £or:Se_UP Menu
@
You need to determine whether or not you have selected the
correct "Brand code." To do this, press the CHANNEL, buttons
on the remote control. As you press the buttons, the channel
number on the front of your VCR shou:ld change. Watch your
cable box. Your cable box ,should show the exact same number
a moment after it appears on your VCR.
If your cable box does not change channels at all, or does not
show the exact same number, do one of the following:
• Try moving the cable box on top of t:he VCR.
• If more than one "Brand code" is listed for your type of
cable box, try a different one. (You can use the CANCE, L
button to move back to the "Brand code" option.)
• Obtain an IR Emitter cable (part name IR EMITTER) from
your Mitsubishi dealer and refer to the section "cor, necting
an IR emitter':' on page 19.
If no code number is listed for your cable box, or if none of the
numbers listed will work, try' each code, from 01 to 94.
If your cable box cannot be operated by a remote control (i.e., if it
is operated with a mechanical dial or slide), then your VCR will
not be able to change channels on the cable box.
If your cable box will not respond to any of'the codes, your VCR
cannot change channels on the cable box. Yon will need to change
channels yourself, using the cable box's remote control. You
should re-program your VCR, choosing "Cab:e" in step _ on :page
30. When programming to record, you will need to leave your
cable box ON and tuned to the channel you wish to record.
If you connected a satellite receiver, press the CHANNEl, buttons
to see that the TV shows the channels coming from the receiver.
If it does not, try repositioning or moving the satellite receiver. If
they still don't appear, you will need to obtain an IR emitter (part
name: IR EMITTER) from your Mitsubishi dealer.
@
After you have determined that you are using the correct
Brand code, turn the shuttle ring to the right to begin memo-
rizing channels. The TV screen will sh_w you a message that
the VCR is memorizing the channels coming from your cable
box. Your TV screen, the f_ont of your VCR, and your cable
box should all display each channel number, one by one.
@
When the VCR is finished memorizing, you will see the screen
for entering the zip code. ]Use the number buttons to enter the
zip code in your area. For' example, if the zip code in your
area is 30071, enter "30071."
If you enter a number incorrectly, turn tlhe shuttle ring to the
left or press the CANCEL button.
When you have finished entering the zip code, turn the
shuttle ring to the right.
31