Mitsubishi HS-U780 Owner's Manual page 33

E>Important:
Broadcast or
cable stations
(call letters)
NBC
HBO
Channel number
your VCR
receives on
Example only
Broadcast or
cable stations
(call letters)
NBC
HBO
Channel number
your VCR
receives on
correct lineup for your area
_AllSet
Lineup2
Guide VCRCH Guide VCRCH
NBC -- 032
HBO -- 005
Use ADJUST _o choose
correct Lineup_ ........
and ENTER.
_AllSet
Setup failed.
Press ENTER to _ry asain
MENU for SeZ-Up Menu
_>Important:
_>Important:
You may see "A E', not "A&E" in the "Guide" column as the
VCR's memory, cannot store every character.
O On a piece of paper, prepare a two-column list and place the
headings "Broadcast or cable stations (call letters)" and
"Channel number your VCR receives on" as shown.
0 In the left column, write the call lette:cs displayed in the left
"Guide" column on the screen.
O
In the right column, write down the nur_ber on which your
VCR receives that channel. (For example, if you rece![ve NBC
on channel 32, v/rite "32".) The channels; in this column are
the correct lineup for your area. (Note: the numbers in the
illustration are examples only.)
O
Turn the ADJUST dial until the correct lineup is displayed in
the 'WCRCH" column on the screen. Turning the ADJUST
dial will show each possible lineup one after another. When
the correct; lineup is displayed, turn the shuttle ring to the
right.
Then follow steps _) and O on page 32.
If the correct lineup is not displayed or you ,;ee the message
"Setup failed" again, the VCR cannot set up the VCR Plus+ ®guide
channel numbers automatically. Set them manually.
If "Setup failed" is displayed onthe screen
If the message "Setup failed" appears on the screen after step @)
or _, the zip code you entered may be wrong or the VCR cannot
identify the channel carrying the data for some reason. Turn the
shuttle ring to the right to move back to re-enter the zip code. If
you entered the zip code incorrectly, re-enter it and turn the
shuttle ring to the right. (If t:he zip code is correct, repeatedly
turn the shuttle rinE[ to the right until the message "1st Step in
Progress...Please Wait." is displayed.) The VCR will try to set up
again. If the VCR still displays the message "Setup failed," then
the VCR cannot set up the VCR Plus+ guide channel numbers
automatically. Set them manually. (See "Setting the VCR Plus+ ®
Guide Channel Numbers" on page 39.)
Automatic channel programming using the AllSet
TM
featu:re may
include vacant channels if there are stray sil,mals or noise on
those channels. If this occurs, you can manually delete the chan-
nels using the procedure in the section "Add:[ng and deleting
channels." You cannot delete satellite channels.
You do not need to perform this set-up again unless you move the
VCR to a new address. After a power fail_ce: the "AllSet" will be
automatically performed again, if you have set the "Clock set"
setting of the "Set the clock" menu to AUTO. (See page 37.)
33