Back Panel - Mitsubishi Electric WD-52527 Owner's Manual

Back Panem
3. 4.
7m
5,
1. Antenna
(ANT-1 MAmN, ANT-2 AUX}
ANT-1 MAIN and ANT-2 AUX can each receive both digital and analog over-the-air channels from a VHF/UHF antenna
or non-scrambled digital/analog cable channels.
Your primary viewing signal source should be connected to ANT-1 MAIN. ANT-1 MAIN must be used to view premium
subscription cable TV service authorized by the CableCARD
TM
access card. The CabteCARD access card is provided b
your local cable company. ANT-2 AUX can continue to receive over-the-air or non-scrambled cable signals.
2. IR Emitter-NetCommand ®
Two jacks are provided for connecting IR emitters. IR Emitters connected to these jacks are used by the NetCommand
system of the TV to control external analog devices such as VCRs, DVDs, cable boxes, satellite receivers and audio receivers.
3. Input-l,-2
Input 1 and 2 can be used for the connection of a VCR, Super VHS (S-VHS) VCR, DVD player, standard satellite receiver or
other A/V device to the TV. Please note that if S-VIDEO and VIDEO are available for the video input, you must choose to
connect only one. They cannot both be connected at the same time.
4. Component-I, -2 inputs YPbPr (480i/480p/720p/1080i}
Component-3 is available on WD-52528 and WD-62628o
These inputs can be used for the connection of devices with component video outputs, such as a DVD player, external HDTV
receiver or compatible video game system. Please see Appendix B for signal compatibility.
5. HDMJ
TM
The HDMV M (High Definition Multimedia Interface) supports uncompressed standard and high definition digital video formats
and existing digital PCM audio formats. If using a cable box, the HDMI input supports both video and audio using a single
cable.
18 Chapter 1. Television Overview