Front Panel Indicator Lights - Mitsubishi Electric WD-52527 Owner's Manual

Hide thumbs Also See for WD-52527:
Table of Contents

Advertisement

FrontoPanei
Indicator
Lights
LAMF'
STATUS
"riMER
.......E,
......
Refer to the following tables for explanations
of the front-panel indicator lights.
None (indicator off)
Green, steady
Green, rapid blinking
Green, slow blinking
TV is powered OFF.
TV is powered ON.
1. TVjust plugged into AC outlet.
2. AC just restored after power failure.
3. TV Rebooting after System Reset
used.
4. TV Rebooting after power
fluctuation
or receiving abnormal
digital signals from digital channel,
CableCARD
TM,
or digital device.
5. You have begun the procedure to
update software from an authorized
flash memory device.
TV powered off and automatic on-
timer is seL
Normal operation.
Normal operation.
Wait until blinking stops before turning on
(approximately
1 minute).
Normal operation.
Wait until blinking stops before turning on
(approximately
1 minute).
Normal operation.
Wait until blinking stops before turning on
(approximately
1-2 minutes).
Normal operation.
Wait until blinking stops before turning on
(approximately
1 minute).
Normal operation.
For detailed
information,
see the instructions
that accompany
the authorized
software
update.
Important:
Do not use non-authorized
software
at
any time.
Normal
operation.
TV can be turned
on at any time.
None (indicator off)
Normal TV on or standby condition.
Normal operation.
Green, rapid blinking
TV just powered off and lamp is
Begins to blink 30 seconds after turning off TV. TV
cooiing,
can be turned on before it begins to biink or after the
blinking stops, but not while the indicator is blinking.
Normal operation.
Yellow, steady
Lamp nearing end of useful life.
This is a recommendation
to have a new lamp ready
before the current lamp stops illuminating.
See
Appendix H for ordering information.
Yellow, blinking
1. Lamp access door is open or not
TV will not operate until lamp access door is secure.
secure.
See Appendix H for installation information.
2. No lamp installed.
TV wiii not operate without a lamp. See Appendix
H
for installation information.
Red, steady
Lamp no ionger iiiuminates and has
Replace the lamp. The TV wiii not operate when
reached the end of the lamp life.
the lamp no longer illuminates.
See Appendix
H for
installation information.
16
Ohapter 1. Television
Overview

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-62528Wd-52528Wd-62527Wd-62528Wd-52528Wd-62527

Table of Contents