Setup Menu - Mitsubishi Electric WD-52527 Owner's Manual

Setup Menu
Setup Menu
Figure 8
Figure 8. Setup Menu
Dispiay the on-screen menus in either Engibh or Spanish
(EspaBoi). The first time you powered On your TV, you
were requested to seiect an on-screen menu ianguage.
If you choose to change the sebcfion, aH menu text will
immediateiy switch to the ianguage of your chobe.
Program tities and other information sent by a
broadcaster wiii be shown in the originai language.
Memorize ChanneJs
Fer Antenna 1 (Main} er Antenna 2 (Aux}
To start channei memorization, first sebct an input
according to the tame bellow.
Input
Ant-1 Air
Ant-2 Air
Ant-1 Cable
Ant-2 Cable
Condition
When connected to an indoor/outdoor
antenna
When connected to direct cable
Press ENTER to start the automatic channel-memorization
process. The memorization process is started separately
for each antenna selection.
During the memorization process, all possible channels
on the selected antenna are scanned twice. Analog
channels are scanned first and then the process is
repeated for digital channels.
To stop the automatic channel-memorization process
before the process is completed, press CANCEL.
Channels memorized before you pressed CANCEL are
retained in memory. If you start the memorization process
again, all previously memorized channels for the selected
antenna input are erased and the process starts over from
the beginning.
After memorizing channels, the channels in memory
can be accessed in ascending or descending order by
pressing CH A or Y. Select the Channel Menu to access
further channel-editing features such as channel add or
delete, channel name, and SQV custom favorite channel
memories.
When you use a CableCARD
TM,
the complete list of
available channels is provided through the CableCARD.
As a result, the Ant-1 channel-memorization options are
not available and are shown grayed out on the screen.
In the TV Guide On Screen@ system, the channels
displayed and the order in which they are displayed
are independent of the channel-memorization process.
Refer to the TV Guide On Screen Interactive Program
Guide User's Manual for detailed instructions on editing
channels shown in this guide.
CJock
You may choose to manually or automatically set
the clock that your TV wiii use for recording or timer
functions.
Figure 9
To manually set the clock, you need to select the current
time, including AM or PM, current date, time zone for
your area and the Daylight Savings time setting.
Figure 9, Time Menu, Manual Clock Setting
Time
Press ADJUST A or • repeatedly to slowly select the
hour or press and hold to quickly select the hour. Press
ENTER to move to the minutes options. Press ADJUST
A or • to select minutes, then press ENTER to select AM
or PM.
Date
Press ADJUST a. or _' to select the correct date.
Chapter 5. TV Menu Screen Operatiens 63