Appendix B: Specifications - Mitsubishi Electric WD-52527 Owner's Manual

Appendix B: Specifications
From time to time, MitsubisM may offer software updates to expand the features or operation of this TV. When these
updates are avaHaMe they win be announced on our website site, MitsubishFtv.com. If you return your Owner's
registration card, with your modeH and sedan number, you may receive written notification of avaHabHesoftware updates.
TV Specifications
Projection System 3 LOB, 0.7" x 3, 1280 x 720 pixels
Lamp 110 watt high=pressure mercury discharge
Channem Frequency Reception Over-the-Air: VNF 2 - 13, UNF 14 - 69
Analog Cable: 1 - 125
Digital Cable: t - 136
Channel Type Over the Air: Anatog NTSC, Digital ATSC with sub-channels
(all 18 video formats)
Cable: Analog NTSC (non-scrambled}
Digital QAM 64 and 256 with sub-channels (non-scrambled}
CableCARDTM: Authorized scrambled and non-scrambmed digital channels
Note for Digital Channels: The channel numbers displayed on-screen are determined by the broadcaster or cable
company and can vary from the standard frequency number. If there is no channel number information included from
the broadcaster or cable company, then the TV win create a channem number based on the frequency number as the
main channel number and the program number as the sub-channel number. When using an authorized CabmeOARD, the
channem numbers are determined by the cable company.
Inputs
Antenna/Cable input: Qty 2 F connector, 76-ohm
HDMI (digital video/audio}: Qty. 2
Signal Type
Video/S-Video: Qty. 3 each
Signal Type
Component Video (Y/Pr/Pb)
WD-52527, WD-62527: Qty. 2 sets
WD-52528, WD-62528: Qty. 3 sets
Signal Type
Audio Inputs:
WD-52527, WD_62527: Qty. 7 pairs
WD-52528, WD-62528: Qty. 8 pairs
Outputs
Video
Record Video: Qty. 1 Video: RCA Pin Plug 1.0 Vp-p, 75 ohm
Signal Type NTSC 480i onmy
Audio
Audio Outputs RCA Pin Plug, 500 mV rms _+200 mV (fun scale) for analog sources.
Audio Output: Qty. 1 pair 1.5 V +_0.5 V (full scale) for digital sources.
Record Audio Output: Qty. i pair
NDMm standard connector
HDMm standards for digital PCM audio and video (480i, 480p, 720p, i080i).
Not intended for use with computer-specific resolutions.
Video: RCA Pin Plug, i.0 Vp-p, 75 ohm
S_Video: Four Pin Din Plug
Y: i,O Vp-p 75 ohm
C: 0.286 Vp_p (burst signal), 75 ohm
NTSC 480i only
RCA Pin Plug (EIA-770.3 Standard Levels and Timing)
Y: i.0 Vp-p (includes sync}, 75 ohm
Pr: 700 mVp-p, 75 ohm
Pb: 700 mVp-p, 75 ohm
EIA-770.i & EIA 770.2,480i, 480p, EIA 770.3, 720p and i080i (video
standards)
RCA Pin Plug 500 mV (fun scale), 43 k ohm
Chapter 6. Special Features 8"7