Mitsubishi Electric WD-52527 Owner's Manual page 48

Edit NetCommand®, Add Devices, continued
Figure I7, [Device] Learn screen
[Device] Advanced Learn Screen
Figure 18
After ieaming the basic device keys, the [Device]
Advanced Learn screen aiiows you to ieam any speciai
keys for your device. Most common IR remote controi
signai formats can be ieamed by NetCommand.
A table of specialized device keys is shown in Appendix
E. You only need to learn the functions your devices
respond to and can ignore the functions that do not apply
to your device.
Figure 18, [Device] Advanced Learn screen
Figure 19, Name screen
Connection for [Device] Screen
Figure 20
This screen aiiows the TV to ieam the connection
between device(s) and input(s). Inputs 1-3, Components
1-3, HDMI 1 and 2, and/or the inputs for the AiV Receiver
aii need to be checked, if connected. Add or remove
check marks to indicate what type of connections (Audio
or Video) are used with each TV and AiV Receiver input.
Name Screen
Figure 19
The Name screen aiiows you to change the defauit
name for each device to a custom name of up to eight
characters (including a blank space), selecting from
letters, numbers and nine different characters. Press
ADJUST • or • to select each letter, then press ENTER
to move to the next position. Press CANCEL on the
remote to delete the current letter and move back
one character position. When in the first position, the
CANCEL button wiii return the name to the default name.
Figure 20. Connection for [Device] screen
48
Chapter 3. NetCommand Setup and Editing