Mitsubishi Electric WD-52527 Quick Reference Manual

NetCommand® Basics
Welcome to NetCommand
With Netcommand, your TV is the heart of your
home theater
NetCommand® is an intelligent control system that
makes your Mitsubishi TV the heart of your home
theater. With NetCommand, the TV sends control
signals to the other devices in the system, telling them
to play, record, change inputs, adjust volume, change
channels and many more functions. All of this is
accomplished with a single remote control and without
changing control layers.
IR Learning and IEEE 1394 Support
The "IR Learning" feature of NetCommand allows the
TV to learn the remote control signals for new devices
that the TV is not already preprogrammed to operate.
NetCommand® also includes the ability to control IEEE
1394 devices by sending control signals on a FireWire®
cable.
Using NetCommand is completely optional
When you first turn on the TV, the NetCommand
Setup Wizard launches. Quit the Setup Wizard if you
would rather set up Netcommand later or not use
NetCommand at all.
Setting Up NetCommand
To set up NetCommand you will select the devices
connected to your TV that you want NetCommand to
control.
To set up NetCommand when you turn on your TV
for the first time:
When you turn on your Mitsubishi TV for the first
•
time, a Setup screen opens.
Follow the on-screen instructions. Also see Steps
•
3-4 below.
To set up NetCommand any other time:
1. Press TV MENU to open the main TV menu.
2. Select the NetCommand icon and press ENTER,
then select Initial and press ENTER.
3. Press ADJUST or
(A/V receiver, cable box, satellite receiver, VCR, DVD
player, camcorder).
4. To select the manufacturer and model for each
device type, press ADJUST
For each device type, if the manufacturer and
•
model are not listed, select Other.
For every device type you do not intend to
•
connect to your TV, select None.
Quick Reference Guide
Models WD-52527, WD-62527
to highlight a device type
or .
Exception: If a camcorder is connected, press
ENTER to select it. (Press ENTER again to
deselect camcorder.)
5. After you have chosen all device types, select
Next > to finalize your choices.
Device Setup screen
Managing Your Home Theater
Use the Edit NetCommand screen to add new devices,
change device settings and connections, delete
devices, and use the "Learn" feature for remote control
signals not already in memory. On-screen instructions
guide you through each step. Your choices are:
Add: Add a new device to the NetCommand setup.
Change: Change the brand/model or input
connections of a device already listed. "Learn" the
remote control signals of devices listed as "Other"
brands.
Guide: Activate/deactivate TV Guide On Screen®,
change ZIP code, add or change input selections.
Review: View a list of all devices and input
connections in the NetCommand home theater
configuration. Turn unused TV inputs or devices on/off.
Delete: Remove a device or erase the NetCommand
home-theater configuration.
Initial: Start setup at the beginning. Only available
after deleting the complete configuration or if
NetCommand was not set up when the TV was first
powered on.
Adding IEEE 1394 Devices
Compatible IEEE-1394 devices are automatically
detected by the TV. Connect the IEEE-1394 device to
the network and power it on. A series of screens will
guide you through the setup process. See your TV
Owner's Guide for detailed information.