Mitsubishi Electric WD-52527 Owner's Manual page 58

Hide thumbs Also See for WD-52527:
Table of Contents

Advertisement

NetCommand
® Controlled
Peer-to-Peer
Connections
What
is a Peer-to-Peer
Connection?
Figure 12
A peer-to-peer
connection
allows the IEEE 1394 devices
in your TV network to taHkto each other without the
further need of TV intervention once the peer-to-peer
connection
is established.
For exampHe, the TV can set up a connection for an JEEE
1394 came box that sends a program to be recorded
to an AiV Disc or DVCR. NetCommand
will estaMish
the connection
between the two devices.
Once the
connection
has been estabHished, the TV can be
turned off or used to watch another device.
Recording
from digitaH channeHs to a DVCR is aHso a peer-to-peer
connection.
In this case, the TV is one of the devices in
the peer-to peer connection.
NOTE: AnaHog or tradifionaH (non-digital) devices can not
be used for peer-to-peer
connections.
Setting
up a Peer4o-Peer
Connection
A peer-to-peer
connection
is a current connection
and
cannot be setup as a delayed connection.
To establish a peer-to-peer
connection:
1. Tune to source.
2. Press CONNECT or RECiCONNECT
on the TV remote.
3. In the "Record to" section, review the destination
device (example: DVCR) and duration.
Change if
necessary.
4. Press CONNECT or RECiCONNECT
a second time to
NOTE:
Multiple peer-to-peer
connections
can
occur simultaneously,
sometimes with the same
source device.
Also, please note that peer-to-peer
connections
are NOT listed on the Record List
screen.
Figure 12, Recording
Setup screen
CanceJing
a Current
Peer-to-Peer
When a peer-to-peer
connection
has been established,
you can cancel the connection
by highlighting the source
device in the Device Selection menu. Confirm that the
on-screen icon for the peer-to-peer
connection
is in
the Connection
Section next to the TV icon, then press
CANCEL
The peer-to-peer
connection
will end and the
destination
icon will be removed.
If there is more than
one peer-to-peer
connection for the same device, all of
the connections
will all be canceled.
58
Chapter 4. IEEE 1394 Devices and NetCommand-ControHed
Recordings

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-62528Wd-52528Wd-62527Wd-62528Wd-52528Wd-62527

Table of Contents