Memorizing Channels Automatically - Mitsubishi HS-U748 Owner's Manual

Setting Up Your VCR

Memorizing Channels Automatically

Using this process, your VCR will automatically memorize all of the
television stations available to you. You can later get rid of
unwanted or unused stations.
If your local cable company scrambles some or all stations,
and/or requires you to use a cable box, then your ability to
memorize channels would normally be limited. The cable
box receives all of your channels, then sends only one to
your TV and your VCR, usually on channel 3 or 4.
If your cable box or cable system seems incompatible
with your new VCR, call your cable company. They may
be able to provide solutions to your problems.
1 Set the VCR's input to Tuner. To do this, press INPUT on the
remote control until a channel number appears on the screen.
2 Press MENU on the remote control. VCR Main Menu comes
up. If First Time Set-Up is not highlighted, use the ADJUST
buttons on the remote to highlight it.
3 Press ENTER. First Time Set-Up menu will appear. Press the
ADJUST buttons to select Memorize channels. Press ENTER.
If you are playing back a tape or receiving a video signal
from an external input, Not available will flash and an error
message will appear. To correct this, stop the tape or turn
off the menus and switch the VCR's input to tuner.
4 You will see the menu for sources connected to the VCR.
Using the list below as a reference, press the ADJUST buttons
to select the kind of antenna you connected.
• Cable if you are using any cable combination, including a
cable box with an A/B switch
• Indoor/outdoor ant. if you use rabbit ears type or roof
mounted type antennas
After you have selected, press ENTER.
5 An on-screen message will show you that the VCR is
memorizing the stations you can receive. You can cancel the
memorization at any time by pressing CANCEL. After the VCR
has memorized all the channels, the screen will return to the
VCR's picture.
Automatic channel memorizing may include vacant
channels if there are stray signals or noise on those
channels. If this occurs, you can manually delete the
channels using the procedure in the section Adding and
Deleting Channels.
IMPORTANT
IMPORTANT
A special note to cable box
subscribers
ªVCR Main Menu
Your choices are:
¬Program to record
√Customize choices
»S-VHS Set-Up
ƒFirst Time Set-Up
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
ƒFirst Time Set-Up
Your choices are:
≈Set the clock
∆Memorize channels
«Add/delete channels
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
∆Memorize channels
What type of sources are
connected to the VCR?
'Cable
"Indoor/outdoor ant.
∫πMENU to go back
∂ ππADJUST to select
≤¥≥πENTER to enter
∑ ππADJUST to select
∆Memorize channels
Now memorizing all the
stations you can receive
Channel
Stand by this may take
a few minutes
To cancel memorization,
press CANCEL
3
13