Advertisement
Available languages
Available languages
Check t helevelness
ofthedryer byfirst p lacing a level onthetopofthedryer near t he
console.
Then, byplacing a level inthe crease onthe side ofthe dryer between the topofthe dryer and
thedryer cabinet, check t helevelness
from front t oback.
3. I.oosen thetopscrew from each ofthe 2 hinges inStep 2 .
A
B
.A
"B
If the dryer is not level, prop up the dryer using a wood
block.
Use a wrench
to adjust the legs
up or down and check again for levelness.
You can change your door swing from a right-side
opening
to a left-side
opening,
if desired.
1.
Place a towel
or soft cloth on top of the dryer or work space to protect
the surface.
Remove
the door
assembly
1.
Open
the dryer door.
2.
Remove the bottom
screw from each of the 2 hinges that attach the dryer door to the front
panel of the dryer.
A. Loosen these screws.
t:3. Remove
these screws.
4.
Remove the dryer door and the hinges
by lifting
upward
on the door. I.ay the door on a
flat, protected
surface, with the inside of the door facing
up. Remove
remaining
2 loose
screws from dryer front panel.
5.
Remove the 4 plastic
plugs located
outside
the dryer door opening.
6,
location of plastic
plugs shown
Install 4 plastic plugs into screw holes in the dryer left where the hinges were removed
in
Step 4.
Advertisement
