Sending A Fax Using The Control Panel; Sending A Fax While Listening To A Call (On Hook Dial) - Lexmark 7550 Series User Manual

9 To send your fax:
• Immediately--Select the "Send now" option.
• At a scheduled time:
a Select the "Delay sending until" option.
b Set a time and date.
10 If you want a paper copy of your fax, select Print a copy of your fax.
11 Click Send.
Sending a fax using the control panel
1 Make sure the printer is on and is connected to a working phone line.
2 Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner
glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the Automatic Document Feeder (ADF). Place these items on the scanner glass.
3 From the control panel, press ,A or 'V' repeatedly until Fax is highlighted.
4 Press _/.
The Fax Mode menu appears.
5 Enter a fax number. For more information on the methods you can use to enter a fax number, see the table that
begins with step 4 on page 115.
Notes:
• You can include a calling card number as part of the fax number.
• A fax number can include up to 64 numbers, commas, periods, and/or the symbols * or #.
6 Press _ to start the fax job.
Note: If you are scanning individual pages using the scanner glass, after each page is scanned, the message
Would you like to include another page in the fax?
appears to prompt you either to scan another
page or to send the fax right away.
7 If you want to send a fax to a group of numbers (broadcast fax), enter the fax numbers using any combination
of the methods listed in the table that begins with step 4, until a maximum of 30 fax numbers have been entered.
Sending a fax while listening to a call (On Hook Dial)
The manual dialing feature lets you dial a telephone number while listening to the call through a speaker on the
printer. It is useful when you must navigate an automated answering system or enter a calling card number before
sending your fax.
1 Make sure the printer is on and connected to a working phone line.
2 From the control panel, press A or Y repeatedly until Fax is highlighted.
3 Press _/.
The Fax Mode menu appears.
4 Press ,& or V repeatedly until on Hook Dial is highlighted.
117