Table of Contents
Advertisement
Using the Change Copy Default Settings submenu
1 From the Setup menu, press A orY
repeatedly until Change
Copy
Default
Setting is highlighted.
2 Press _/.
3 After changing values, press _) to save these values and exit this submenu.
Color
Specify to print in color or black and white.
Quality
Specify print quality.
Note: Auto and Photo are good for pictures and paper-based print jobs. Auto
is good for printing on transparencies.
Content Type
Specify the type of document you want to print.
2-Sided Original
Specify if you want to copy a two-sided original.
Paper Handling
Specify the size and type of paper loaded. For more information, see "Using
the Paper Handling submenu" on page 63.
Changing the default copy settings
1 From the control panel, press A or V
repeatedly until copy is highlighted.
2 Press ,/.
3 Press V repeatedly until Change
Default
Settings is selected.
4 Press _/.
l_]lmmSL_
J:
l®]_
U_J_m
8
Color
Choose to copy in color and black and white.
Quality
Adjust the quality of a copy. You can choose among the following
options: Normal, Photo, Auto, or Draft.
Content Type
Specify the type of document being copied: Text and Graphics, Photo,
Text Only, or Line Drawing.
2-Sided Original
Specify whether the original document is two-sided.
Paper Handling
Specify the size and type of the paper loaded.
5 Use the control panel buttons to navigate the menu items and make your choices.
6 Press _) to save your settings.
105
Advertisement
Table of Contents
Troubleshooting
