Phone Line Busy - Lexmark 7550 Series User Manual

7 Press A or Y repeatedly until you reach Max Send Speed.
8 Press '_ or _" to select a lower transmission speed.
9 Press _) to save.
10 Resend the fax.
11 If the problem persists, repeat step 1 through step 10 to resend the fax at successively lower transmission
speeds.
Notes:
• 2400 bps is the lowest transmission speed
• The lower the transmission speed, the longer it will take your fax to print.
• This solution will reduce the speed for future faxes until you reset the transmission speed.
Phone Line Busy
These are possible solutions. Try one or more of the following:
Change redial settings
The printer automatically redials three times at 2-minute intervals. You can change the default settings to redial up
to five times at intervals up to 8 minutes.
To change the redial settings:
1 From the control panel, press A or V repeatedly until Fax is highlighted.
2 Press %/.
3 Press A or V repeatedly until the Fax setup submenu is highlighted.
4 Press %/.
5 Press A or 'V' repeatedly until the Dialing and Sending submenu is highlighted.
6 Press %/.
7 To change the length of time between redials:
a Press A or V repeatedly until you reach Redial Time.
b Press '_ or _ repeatedly until the setting you want appears.
c Press _) to save.
8 To change the number of times the printer will redial:
a Press A or V repeatedly until you reach Redial Tries.
b Press '_ or _ repeatedly until the setting you want appears.
c Press _) to save.
Schedule to resend fax at a later time
See "Sending a broadcast fax at a scheduled time" on page 118.
195