Networking Glossary - Lexmark 7550 Series User Manual

Table of Contents

Advertisement

Networking glossary
ad hoc mode
ad hoc network
AutolP address
BSS (Basic Service Set)
channel
DHCP (Dynamic Host Configuration
Protocol)
DHCP IP address
DHCP server
infrastructure mode
installation cable
internal wireless print server
IP (Internet Protocol) address
ipconfig
MAC (Media Access Control) address
MAC filtering
network adapter/card
network hub
network name
ping
printer nickname
router
security key
signal strength
SSID (Service Set Identifier)
Static IP address
switch
A setting
for a wireless
device that lets it communicate
directly with other wireless
devices without
an access
point or router
A wireless
network that does not use an access point
An IP address automatically
assigned
by a network
device.
If the device is set to use
DHCP, but no DHCP server
is available,
an AutoIP address
may be assigned
by the
device.
Basic Service Set describes
the type of wireless
network
that you are using. The BSS
type can be one of the following:
Infrastructure
network
or Ad-Hoc
network.
A specific
radio frequency
used by two or more wireless
devices to communicate
with
each other. All devices on the network must use the same channel.
A language
used by DHCP servers
An IP address automatically
assigned
by a DHCP server
A computer
or router that gives a unique IP address to each device on the network.
Unique
addresses
prevent
conflicts.
A setting
for a wireless
device that lets it communicate
directly with other wireless
devices
using an access point or router
Connects
the printer to the computer
temporarily
during some methods
of installation.
A device that lets computers
and printers talk to each other over a network without cables
The network
address
of a computer
or printer.
Each device on the network
has its own
network
address.
The address
may be assigned
manually
by you (Static IP address),
automatically
by the DHCP server (DHCP
IP address),
or automatically
by the device
(AutolP
address).
A command
that displays
the IP address
and other network
information
of a Windows
computer
A hardware
address that uniquely
identifies
each device on a network.
You can usually
find the MAC address
printed on the device.
A method of limiting access to your wireless network by specifying
which MAC add resses
may communicate
on the network.
This setting
may be specified
on wireless
routers or
access points.
A device that lets computers
or printers
talk to each other over a network
A device that connects
multiple
devices on a wired network
See "SSlD (Service
Set Identifier)"
on page 218
A test to see if your computer
can communicate
with another
device
The name you assign to your printer so that you and others can identify it on the network
A device that shares a single Internet connection
with multiple computers
or other
devices.
The basic router controls
network
traffic.
A password,
such as a WEP key or a WPA pass phrase, used to make a network secure
Measure
of how strongly
a transmitted
signal is being received
The name of a wireless
network.
When you connect
a printer to a wireless
network,
the
printer needs to use the same SSlD as the network.
Also referred
to as network
name
or BSS (Basic Service Set).
An IP address assigned
manually
by you
A device similar to a network
hub that can connect
different
networks
together
218

Advertisement

Table of Contents
loading

Table of Contents