No Photo/Paper Size Selection Has Been Made; Could Not Detect A Proof Sheet; No Proof Sheet Information; No Valid Photo Image Files Detected - Lexmark 7550 Series User Manual

No photo/paper size selection has been made
You have not selected any of the options on step 2 of the photo proof sheet you _rinted and scanned.
1 Make sure you completely fill in your selected circle or circles.
2 Press X to continue.
Could not detect a proof sheet
The document placed on the scanner glass is not a valid proof sheet. For more information, see "Printing photos
stored on a memory device using the proof sheet" on page 94.
No proof sheet information
The photo proof sheet you printed and scanned is no longer valid.
You may have removed the memory card or flash drive from the printer, or turned off the printer, before scanning
the photo proof sheet.
For more information, see "Printing photos stored on a memory device using the proof sheet" on page 94.
No valid photo image files detected
No supported images have been found on the memory card or flash drive.
The printer will read photos created using the JPEG format. For more information, see the documentation that came
with the digital camera.
Only one photo enhancement may be chosen at a time
You have selected more than one option on step 2 of the photo proof sheet you printed and scanned.
1 Make sure you completely fill in only one circle for each option.
2 Press X to continue.
Only one photo/size selection can be chosen at a time
You have selected more than one option on step 2 of the photo proof sheet you printed and scanned.
1 Make sure you completely fill in only one circle for each option.
2 Press X to continue.
Paper or Photo Size error
One or more photos selected for printing have a size that does not match the size of the paper loaded in the printer.
Change the photo size to match the size of the paper loaded in the printer, or change the paper size to match the
photo size.
PictBridge communications error
Remove and then reinsert the USB cable that came with the camera into the PictBridge port on the front of the printer.
Please remove the camera card.
The printer can read either a PictBridge-enabled digital camera or a memory card, but not both at the same time.
1 Remove both the PictBridge-enabled digital camera and the memory card.
2 Reinsert only one of the devices mentioned above.
202