Table of Contents
Advertisement
2 Click Programs or All Programs .-, Lexmark 7500 Series.
3 Click Solution
Center.
If an exclamation point (!) appears on either of the print cartridges, the ink level is low. Install a new cartridge.
Check
the USB connection
1 Check that the USB cable is connected to the computer. The USB port on the back of the computer is marked
by the _
USB symbol. Plug the long, flat end of the USB cable into this port.
2 Make sure that the smaller, more square end of the USB cable is plugged into the back of the printer.
3 Check that the USB cable is not damaged and that the _
light is on.
Checking
the Spool Settings for banner
printing
Banner printing is not possible if certain Spool Settings are selected. Verify that you have the right settings selected.
1 Click Start .._ Settings
.._ Printers or Printers and Faxes.
2 Right-click the Lexmark 7500 Series icon.
3 Select Properties.
4 Click the Advanced
tab.
5 At the bottom of the Advanced tab, click Print Processor.
6 Verify that the Default data type is LEMF. If it is not, select LEMF from the available choices, and then click
OK.
Resolving
font problems
Have you applied
the fonts
correctly
in the program?
Most programs do not print a stretched or resized font.
Is the font a TrueType
font?
Is it available
on the computer?
The font you are trying to print may not be available in the program font selection box. Not all fonts are designed to
be printed; make sure the font is a TrueType font. See the program documentation for more information.
Was the document
formatted
or created
for the printer?
Windows may substitute different fonts. Line and page breaks may change with the font. Use the program that
created the document to fix these problems, and then save the changes for the next time you print.
Printer
is busy printing
another
job
Wait until the printer has finished printing all other print jobs before sending this job to print.
170
Advertisement
Table of Contents
Troubleshooting
