Table of Contents
Advertisement
Paper Handling
Specify the size and type of paper loaded. For more information, see "Using
the Paper Handling submenu" on page 63.
Language
Change the language shown on the control panel.
Country
Change the country or region shown on the control panel to your country or
region.
Key Press Tone
Set the volume of the tone when a control panel button is pressed to either On
or Off. On is the default.
Power Save
Set the printer to enter a power saving mode at or after a certain time limit.
Block Host Settings
Allow your system support person to block to prevent individual users on a
network from making printer setting changes using the Printer Setup Utility.
Speaker Volume
Set the volume of the speaker during a call.
Resetting
printer
software
to factory
default
settings
Windows
2000, Windows
XP, or Windows
Vista
users
1 In Windows Vista, click @ -.* Control
Panel -.* Printer.
In Windows 2000 and Windows XP, click Start -* Settings
-* Printers or Printers and Faxes.
2 Right-click the Lexmark 7500 Series icon.
3 Click Printing
Preferences.
4 Click the Save Settings
menu.
5 From the Restore section, select Factory Settings
(Defaults).
Note: Factory default settings cannot be deleted.
Using the Change
Print File Default
Settings submenu
1 From the setup
menu, press ,A. orY
repeatedly until Change
Print
File
Default
Settings
is
highlighted.
2 Press '/.
3 After changing values, press _) to save these values and exit this submenu.
Paper Handling
Specify the size and type of paper loaded. For more information, see "Using the Paper Handling
submenu" on page 63.
75
Advertisement
Table of Contents
Troubleshooting
