1-Port Oc-192C/Stm-64 Pos/Rpr Xfp Spa Overview; 1-Port Oc-192C/Stm-64 Pos/Rpr Xfp Spa Leds - Cisco 7600 series Hardware Installation Manual

1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview

1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview

The 1-Port OC-192c/STM-64 POS/RPR XFP SPA is a single-height SPA that is installed in one SIP
subslot. The 1-Port OC-192c/STM-64 POS/RPR XFP SPA provides SONET and SDH network
connectivity with a bandwidth of 9.95 Gbps.
For more information about SPA bandwidth, see the "Bandwidth Oversubscription" section in this
chapter. For more information about SPAs and their compatibility with SIPs and modular optics, see the
product overview chapter in this guide.
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA uses a 10-Gbps small form-factor pluggable optical
receptacle for each port allowing connection to single-mode optical fiber. For more information on the
optical fiber cables used with this SPA, see the
Modules and Cables" section on page
The following sections describe the 1-Port OC-192c/STM-64 POS/RPR XFP SPA:
•
•
•

1-Port OC-192c/STM-64 POS/RPR XFP SPA LEDs

The 1-Port OC-192c/STM-64 POS/RPR XFP SPA has six LEDs, as shown in
Figure 3-26
1
2
3
The WRAP, PASSTHRU, and MATESYNC LEDs apply to the SPA in RPR/SRP mode only. As of ,
Note
RPR/SRP mode is not supported.
Cisco 7600 Series Router SIP, SSC, and SPA Hardware Installation Guide
3-32
OC-3c/STM-1 POS SPA LEDs, page 3-15
OC-3c/STM-1 POS SPA Interface Specifications, page 3-15
OC-3c/STM-1 POS SPA SFP Optical Transceiver Modules and Cables, page 3-16
1-Port OC-192c/STM-64 POS/RPR XFP SPA Faceplate
1 3
2
WRAP LED
PASSTHRU LED
MATESYNC LED
Chapter 3 Overview: Cisco 7600 Series Router Shared Port Adapters
"OC-3c/STM-1 POS SPA SFP Optical Transceiver
3-16.
4
5
4
CARRIER LED
5 ACTIVE LED
6 STATUS LED
Figure 3-26.
SPA-0C192POS-XFP
6
OL-5052-08