Creating SSU Diskettes
SSU may be run directly from the E
diskettes. Before you can run the SSU from diskettes, you must copy the SSU from the
E
B
XPRESS
UILDER
If your diskette drive is disabled, or improperly configured, you must use the FLASH-
resident BIOS Setup Utility (F2) to enable it so that you can use the SSU. If necessary, you
can disable the drive after you exit the SSU. Information entered using the SSU overrides
information entered using Setup.
Power on the system.
1.
If the diskette drive is disabled, enable it using the BIOS Setup Utility, explained later
2.
in this chapter. Specify the correct type of diskette drive.
3.
Using the E
XPRESS
CD-ROM to a diskette.
B
CD-ROM, create the SSU diskette.
XPRESS
UILDER
B
CD-ROM or from DOS-bootable
UILDER
System Setup Utility B-3