Creating Ssu Diskettes - NEC EXPRESS5800 LC1400 series User Manual

Creating SSU Diskettes

SSU may be run directly from the E
bootable diskettes. Before you can run the SSU from diskettes, you must copy
the SSU from the E
If your diskette drive is disabled, or improperly configured, you must use the
FLASH-resident BIOS Setup Utility (F2) to enable it so that you can use the
SSU. If necessary, you can disable the drive after you exit the SSU. Information
entered using the SSU overrides information entered using Setup.
Note:
as created by the E
bootable. In order to use this diskette, you must make it
bootable.
1. Power on the system.
2. If the diskette drive is disabled, enable it using the BIOS Setup, explained
later in this chapter Utility and ensure that it is user accessible. Specify the
correct type of diskette drive.
3. Using the E
XPRESS
B CD-ROM to a diskette.
XPRESS UILDER
Because of license restrictions, the SSU diskette,
B
XPRESS UILDER
B CD-ROM, create the SSU diskette.
XPRESS UILDER
B CD-ROM or from DOS-
UILDER
CD-ROM, is not
System Setup Utility B-3