NEC EXPRESS 5800 ES1400 SERIES Online Service Manual page 123

8. Press
Enter
9. Select
Enable
10. If you are finished editing the settings for the system board, press
to the main menu, Step 3.
Press
11.
Esc
Select Step 4, Save Configuration. Once you select this step, the changes are immediately saved
12.
into an INF file, a CMS file, and nonvolatile memory.
13. Press
Esc
command line prompt. You'll need to reboot the system to let your changes take effect, but
remove the SSU diskette drive.
first
You should now see the
5-14 Problem Solving
to display the option menu.
and press .
Enter
again to return to the main SSU menu.
to exit the SSU. You will be prompted to reboot the system or simply exit to the
prompt displayed at bootup.
F2
press to reboot.
Then F10
. This takes you back up
Esc