Changing The Adapter And Device Configurations - NEC EXPRESS 5800 ES1400 SERIES Online Service Manual

Changing the Adapter and Device Configurations

The SCSI Configuration Utility Main Menu lists the onboard SCSI adapter and shows its current
settings. The adapter controls the operation of the SCSI devices in your system (hard disk drives or
removable media devices).
Select "Adapter Setup" and press
1.
Description
SCAM Support
Parity
Host SCSI ID
Scan Order
Removable media support
CHS Mapping
Highlight the function you want to change and press
2.
changes when you exit the configuration utility.
To change device configuration parameters, perform the following steps:
At the SCSI Configuration Utility Main Menu, select "Device Selections" and press
1.
The Devices 0 to 7 screen displays.
Select the SCSI device you are reconfiguring and press
2.
Hard Disk Drives, refer to the "SCSI Hard Disk Drives" Table below; if you are configuring
SCSI Removable Media Devices, refer to the "SCSI Removable Media Devices" Table below for
recommended settings.
. The Adapter Setup screen displays.
ENTER
Adapter Setup Screen
Recommended Setting or Display
Only
On
On
7
Low to High
None
SCSI Plug and Play Mapping
Your Configuration
. You will be prompted to save
ENTER
. If you are configuring SCSI
ENTER
Configuring Your System 3-19
.
ENTER