Power Off - NEC EXPRESS 5800 ES1400 SERIES Online Service Manual

n
Serial Line
Baud Rate
COM Port No.
connected.
n
Connect
prompted for the EMP password.
n - displays the Phonebook dialog.
Config
- exits the Connect dialog without any action taken.
n
Cancel
n - displays dialog level help information.
Help
Power On/Off
Selecting Power On/Off from the Action menu allows you to power the server on or off, with post-
power-up options. It generates the Power on/off dialog.
Options available in the dialog are:
n
Power ON
n

Power OFF

RESTRICTED mode for EMP operations.
n
Post-power-up option -
redirection. The setting is available after the next power-up. The default selection is EMP active.
- exits the dialog without any action taken.
n
Cancel
- displays dialog level help information.
n
Help
C-10 Emergency Management Port Console
- must be filled out when the line selection is set to Direct connect (Serial Line).
- must be 19200 for EMP to connect properly.
- set the COM Port number to which the null modem serial cable is
- initiates connection to the connected server. When this button is clicked, you are
Power On/Off Dialog
- powers on the server.
- powers off the server. This option is not allowed if the server is configured in
sets the mode selection of the server to EMP active or BIOS