Creating Ssu Diskettes - NEC NEAX Express User Manual

Creating SSU Diskettes

The SSU is run from DOS-bootable diskettes. Before you can run the SSU from
diskettes, you must copy the SSU from the CD-ROM to a diskette.
If your diskette drive is disabled, or improperly configured, you must use the
FLASH-resident BIOS Setup Utility (F2) to enable it so that you can use the
SSU. If necessary, you can disable the drive after you exit the SSU. Information
entered using the SSU overrides information entered using Setup.
1. Power on the system.
2. If the diskette drive is disabled, enable it using the BIOS Setup, explained
later in this chapter Utility and ensure that it is user accessible. Specify the
correct type of diskette drive.
3. Using the CD-ROM, create the SSU diskette.
System Setup Utility B-3