Primary/Secondary Ide Master And Slave Submenu - NEC EXPRESS 5800 ES1400 SERIES Online Service Manual

Feature
Type
Cylinders
Heads
Sectors
Maximum Capacity
Multi-Sector Transfer
LBA Mode Control
32 Bit I/O
Transfer Mode
Ultra DMA Mode
3-6 Configuring Your System

Primary/Secondary IDE Master and Slave Submenu

Choices Description
Auto allows the system to attempt auto-detection of
Auto
the drive type.
None informs the system to ignore this drive.
None
CD ROM allows the manual entry of some fields
described below.
CD-ROM
User allows the manual entry of all fields described
below.
User
0 to 65535 Number of cylinders on drive. This field is
changeable only for Type User.
1 to 16 Number of read/write heads on drive. This field is
changeable only for Type User.
0 to 63 Number of sectors per track. This field is
changeable only for Type User.
N/A Computed drive size. This field is informational
only for Type User.
Disabled Determines the number of sectors per block for
2, 4, 8, or 16 sectors multi-sector transfers. This field is informational
only for Type Auto.
Disabled Enabling LBA causes logical block addressing to be
Enabled used in place of cylinders, heads, and sectors. This
field is informational only for Type Auto.
Disabled Enabling allows 32 bit IDE data transfers.
Enabled
Standard Selects the method for moving data to and from the
Fast PIO 1 drive. This field is informational only for Type
Fast PIO 2 Auto.
Fast PIO 3
Fast PIO 4
FPIO 3/DMA 1
FPIO 4/DMA 2
Disabled Selects the Ultra DMA Mode for moving data to
Mode 0 and from the drive.
Mode 1
Mode 2
Your Setting