Recommended Resource Settings; System Resource Usage - NEC EXPRESS 5800 ES1400 SERIES Online Service Manual

Recommended Resource Settings

The following table shows the recommended RCA system board settings for a sample
system and provides a place for you to record any changes you make to the settings.
SYSTEM GROUP
System Identification and Version Information
SSU Configuration File Version
MP Spec. Version
Processor Speed Setting
MEMORY SUBSYSTEM GROUP
Extended Memory Options
ON-BOARD DISK CONTROLLER GROUP
On-board Floppy Controller
On-board IDE Controller
ON-BOARD COMMUNICATIONS DEVICE GROUP
Serial Port 1 Configuration
Serial Port 2 Configuration
Parallel Port Configuration
Parallel Port Mode
FLOPPY DRIVES GROUP
Floppy Drive A Option
Floppy Drive B Option
IDE DEVICES GROUP
IDE 32-Bit I/O
KEYBOARD GROUP
Numlock
Key Click
Typematic Speed
Typematic Delay
SCSI ROM BIOS GROUP
Embedded SCSI Devices Option ROM
Scan

System Resource Usage

Clicking on the Resource Use button in the Configuration window displays the System
Resource Usage window. This window shows what resources each device is consuming.
This information is useful for choosing resources if a conflict occurs. Devices can be
organized according to the resources the user wants to examine using the options in the
Resource section of the screen.
NORMAL SETTING
Display Only
V 1.4
3.5 X Bus Speed
Use BIOS Setup Utility
Enable
Enable Primary and
Secondary
3F8h – IRQ4
2F8h – IRQ3
378h – IRQ7
Extended Capabilities, Port
DMA 1
3.5 1.44/1.25 MB Drive
Disabled or not installed
Enable
OFF
Disable
30CPS
500 MS Delay
Enable
System Setup Utility B-11
YOUR
CONFIGURATION