Connecting The Power Cord - NEC EXPRESS 5800 ES1400 SERIES Online Service Manual

Connecting the Power Cord

Plug the female end of the AC power cord into the input receptacle on the rear of the power supply
cage. Plug the male end of the power cord into NEMA 5-15R outlet for 100-120 VAC or NEMA 6-
15R outlet for 200-240 VAC.
If the power cord supplied with the system is not compatible with the AC wall outlet in your
region, obtain a suitable power cord that meets the following criteria.
n The power cord must be rated for the available AC voltage and have a current rating that is at
least 125% of the current rating of the system.
n The power cord connector that plugs into the wall outlet must be terminated in a grounding-
type male plug designed for use in your region. It must have certification marks showing
certification by an agency acceptable in your region.
n The power cord connector that plugs into the system must be an IEC- type CEE-22 female
connector.
n The power cord must be less than 1.8 meters (6.0 feet) long.
Your system shipped with a power cord. Do not attempt to modify or use the
supplied AC power cord if it is not the exact type required.
2-10 Setting Up the System
WARNING