How To Launch The Programs - Pfaff Creative Performance Owner's Manual

8. At the end of the installation, you will be
prompted to connect your embroidery machine.
Click Finish on the last page. Leave your
Embroidery System software CD in your
computer.
9. The Found New Hardware wizard will appear.
Select 'No, not at this time' on the rst page,
then click Next. Select 'Install the software
automatically', then click Next. A warning will
appear that the drivers are not signed. This is
normal and should not be a cause for concern.
Click Continue Anyway, and the driver
installation will complete automatically.

How to launch the programs

Shortcuts on the Desktop
1. Double-click on the Shortcut to the
Embroidery System program folder. A list of
programs appears.
2. Double-click on
QuickFont or
Alternatively use the Start Menu to open modules
under Start, All Programs,
System.
Viewing and printing PDF Guides
To nd all the Reference and Sample Guides for
your Embroidery System software, go to
Start, All Programs,
then choose Reference Guides or Sample Guides.
Choose relevant folder, then select the desired PDF
Guide. Double-click on the desired name to launch
the relevant .pdf le if you have Adobe Acrobat
installed on your computer. To install the Acrobat
Reader, insert the
select that option from the menu that appears.
Embroidery Machine Communication
module
The Embroidery Machine Communication module
must be active ( or
machine with your computer. The icons are found
in the lower right corner of your computer screen. If
the Embroidery Machine Communication module
is not active, it may be started from the Send tab of
Con gure.
Organizer,
Con gure to launch it.
Embroidery
Embroidery System
Embroidery System CD and
) to use your embroidery
How to update your machine
Be sure to consult the web site at www.pfaff.com
and/or your local authorized PFAFF® dealer
for updates and upgrades for your machine and
Owner's manual.
You can update your machine using the USB
embroidery stick or the USB cable packed with your
machine (P/N:412 62 59-04).
Updating instructions
• Go to the PFAFF ® web site at www.pfaff.com to
nd information about available updates.
• Follow the update wizard to prepare your USB
embroidery stick for the update.
• To start your machine in update mode, press
and hold the reverse button while turning on
your machine. Keep the reverse button pressed
until update mode is visible on the PFAFF®
Color Touch Screen. Follow the
instructions to update.
Make sensational embroideries using the optional
GRAND DREAM HOOP (part number
820888096).
Learn more about different hoops and embroidery
collections from your local PFAFF
pfaff.com.
dealer or at www.
®
2:13