Appendix B: Technical Specifications; Blackdiamond 8810 Switch - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

B Technical Specifications
This appendix includes the following technical specifications:
BlackDiamond 8810 Switch on page 167
●
BlackDiamond 8806 Switch on page 170
●
Power Supplies for BlackDiamond 8800 Series Switches on page 172
●
Connector Pinouts on page 173
●

BlackDiamond 8810 Switch

Table 19: BlackDiamond 8810 Switch Technical Specifications
Physical Dimensions
BlackDiamond 8810 chassis
Weight
BlackDiamond 8810 chassis
(empty)
BlackDiamond 8810 chassis
(fully loaded)
Power supply
BlackDiamond 8810 fan tray
BlackDiamond 8810 PSU/fan
controller
Safety Standards
North American Safety of ITE
European Safety of ITE
International Safety of ITE
BlackDiamond 8800 Series Switches Hardware Installation Guide
Height: 24.47 inches (62.2 cm)
Width: 17.51 inches (44.5 cm)
Depth: 18.23 inches (46.3 cm)
79 lb (35.8 kg)
196 lb (88.9 kg)
7 lb (3.2 kg)
6.75 lb (3.06 kg)
1.75 lb (.79 kg)
UL 60950-1:2003 1st Ed., Listed Device (US)
CSA 22.2#60950-1-03 1st Ed.(Canada)
Complies with FCC 21CFR 1040.10 (US Laser Safety)
CDRH Letter of Approval (US FDA Approval)
NOM/NYCE (Mexico)
IEEE 802.3af 6-2003 Environment A for PoE Applications
EN 60950-1:2001+A11
EN 60825-1+A2:2001 (Lasers Safety)
TUV-R GS Mark by German Notified Body
73/23/EEC Low Voltage Directive
CB Report & Certificate per IEC 60950-1:2001 Country Deviations
AS/NZX 60950-1(Australia /New Zealand)
167