Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual page 84

Installing the BlackDiamond 8800 Series Chassis
To ground the chassis:
1 Locate the grounding point on the back of the chassis
Figure 48: Back of BlackDiamond 8806 Chassis
Grounding point
Figure 49: Back of BlackDiamond 8810 Chassis
Grounding point
2 Strip 0.5-inch (1.2-cm) of insulation from the stranded copper wire cable.
3 Insert the stripped wire into the cable lug.
84
(Figure 48 and Figure
PSU / fan
controllers
BlackDiamond 8800 Series Switches Hardware Installation Guide
49).
EX_128A
PSU/Fan
controllers
ASP044A