Module Leds; Port Leds On Non-Poe Modules - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Module LEDs

Table 5 describes the LED activity for all BlackDiamond 8800 series I/O modules.
Table 5: BlackDiamond 8800 Series I/O Module LEDs
LED Color
Status Green blinking
Amber blinking
Off
DIAG Off
Amber blinking
Amber

Port LEDs on Non-PoE Modules

This section describes the port LEDs for non-PoE BlackDiamond 8800 series I/O modules and for port
option cards installed in the MSM-8c. These include the following modules and option cards:
G24X
●
G48T
●
10G4X
●
G48Ta
●
G48Xa
●
10G4Xa
●
10G4Ca
●
G48Tc (without S-POE card)
●
Table 6 describes the LED meanings for each port on the non-PoE BlackDiamond 8800 series I/O
modules and the port option cards for the MSM-8c.
Table 6: Port LEDs for the BlackDiamond 8800 Series Non-PoE I/O Modules and Port Option Cards
LED Color
Port Solid green
Slow green blinking
Amber blinking
Off
NOTE
Table 6 describes port LED activity for the G48Tc and G48Te2 modules without an installed S-POE card. When
these modules have an S-POE card installed, the port LEDs operate as described in
BlackDiamond 8800 Series Switches Hardware Installation Guide
Indicates
Normal operation
Configuration error, code version error, diagnostic
failure, or other severe module error
No power
Normal operation
Diagnostics in progress
Diagnostic failure
G24Xc
●
G48Xc
●
10G4Xc
●
10G8Xc
●
G48Te
●
G48Te2 (without S-POE card)
●
S-10G1Xc option card
●
S-G8Xc option card
●
Indicates
Link up
Port disabled
Activity
Link down
I/O Modules
Table 7.
39