Xm-2Hr I/O Module; Xm-2Hr Leds - Extreme Networks 12800 Series Hardware Installation Manual

BlackDiamond 12800 Series Modules

XM-2HR I/O Module

Figure 13 shows the XM-2HR I/O module.
Figure 13: XM-2HR I/O Module
Module status
LEDs
The XM-2HR I/O module has 10 SFP ports and 10 autosensing 10/100/1000BASE-T ports that use
standard RJ-45 connectors. In addition, it has one unpopulated XENPAK-based 10-Gigabit Ethernet port.
The default configuration of the XM-2HR I/O module is as follows. All ports:
Are added to the default VLAN as untagged.
●
Inherit the properties of the default VLAN (for example, protocol type and VLANid).
●
In addition, the 10/100/1000BASE-T ports and SFP ports operate in autonegotiation mode.

XM-2HR LEDs

The XM-2HR I/O module has the following LEDs:
Module status
●
Module diagnostics
●
Port status
●
28
10 Gbs ports
Mini-GBIC
fiber ports
10/100/1000BASE-T ports
BlackDiamond 12800 Series Switches Hardware Installation Guide
BD_167