Site Preparation
RJ-45 Connector Jackets
Use RJ-45 cable with connector jackets that are flush with the connector or that have connectors with a
no-snag feature.
Using cable with jackets that are wider than the connectors can cause:
Connectors that are not properly aligned with the port.
●
Crowded cable installation, which can cause connectors to pop out of the port.
●
Figure 25
shows examples of connector jacket types that are not recommended as well as those that are
recommended.
Figure 25: RJ-45 Connector Jacket Types
Not recommended
52
Best
0.1" = 1mm actual
Better
39.37% : 254%
BlackDiamond 12800 Series Switches Hardware Installation Guide
SPG_001