Extreme Networks 12800 Series Hardware Installation Manual page 86

Installing Power Supply Units
Figure 47: Installing and Routing the AC Power Cords
3 Hold the AC power cord retainer channel in the position shown in
Figure 48: BlackDiamond 12804 AC Power Cord Retainer
Captive screw
4 Place the retainer channel against the switch as shown in
end of the channel.
86
Starting at the left, insert each plug
and lift power cord over previous plug
Captive screw
BlackDiamond 12800 Series Switches Hardware Installation Guide
EX_138
Figure 48.
EX_141
Figure 49. Tighten the captive screw at each