Horizon Fitness T82 User Manual page 7

NOTE=
D uring each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before
completely tightening any ONEbolt. NOTE:A light application of grease may aid in the installation of hardware.
Any grease, such as lithium bike grease is recommended.
i_ I _ i_ii
I--h_RD_S_RE
B_O _c_Hr/_z_, j
HOLT ( A) FLAT WASHER ( H)
15mm 20 mm
Qty:1 Qty:1
HOLT ( H)
Qty:1
TEFLON WASHER(C)
18mm
Q_:I
FLAT WASHER ( E) WAVY W ASHER ( F)
27 mm 29mm
Qty:1 Qty:1
MAiN FRAME
LEFT CONSOLE MAST
WAVY W ASHER (F) _
LEFTLINKAGE ARM
BOLT (A) _. _ _?/_
FLAT W ASHER (B)
/
TEFLON WASHER ( C) /
ELEVATION FRAME
A OpenNARBWAREBAG I.
B Cut banding straps. Donot moveor lift treadmill frompackaging.
C MoveLEFTLINKAGEARM i nto position. InsertBOLT(A)and FLATWASHER ( B) into LEFT
LINKAGE A RMfollowedby a TEFLON WASHER ( C) and attach to ELEVAtiON F RAME
D Lift LEFT CONSOLE MAST into upright position. Besure to hold the consolemast firmly,as
it will not stay in the upright position on its own.
E InsertBOL T(D) and I FLAT WASHER ( E) throughLEFT CONSOLE MAST followedby a
WAVY WASHER ( F) and attach to MAINFRAME.